CONNECT 2 - Autosetup & Autogain

1. Autosetup

Autosetup can be activated in CONTROL CENTER in the top left corner. 

Autosetup helps to find the right settings for your input channels, including 48V, low-cut filter, preamp characteristics, Denoise, Compressor, and Clipguard settings.

2. Autogain

Autogain sets the right gain setting for your input channels. 

1. To start Autogain on the hardware user interface, press the Autogain button in the center
2. Now, press the input channel you want to set up the gain for
3. The microphone and instrument input can be chosen individually or simultaneously
4. Confirm your selection by pressing the autogain button again
5. A timer will start, indicated on the LED wheel
6. Give a reference performance during this period
7. When finished, the LED wheel blinks green, and your gain is set accordingly.
8. If you see the LED wheel blink red, something went wrong. In this case, try the Autogain process again.