Comparar
Sistema de micrófono definitivo
Incluido: Shock mount, Pop filter XL, 10-pin microphone cable, Transport case
Cápsula de condensador de 1"
Control perfecto del patrón polar
4 características distintas de válvula
Circuito de válvulas y FET combinable
Control remoto desmontable
Especificaciones
- Type
Condenser, externally polarized
- Acoustical operating principle
Pressure gradient transducer
- Transducer Ø
25.4 mm, 1 in
- Diaphragm
3 micron gold sputtered Mylar
- Polar pattern
Seamless from omni to wide cardioid, cardioid, supercardioid, figure-8
- Frequency range
20 ... 20,000 Hz
- Sensitivity
17.2 mV/Pa, -35.3 dBV/Pa
- Self-noise
10 dB (A) FET, 13 dB (A) tube
- Max. SPL for 0.5 % THD
137 dBSPL, 0 dB attenuation
- Signal / noise ratio
84 dB (A) FET, 81 dB (A) tube
- Dynamic range
127 dB (A)
- Attenuation
0 dB
-6 dB
-12 dB
-24 dB
- Low-cut filter
lin
40 Hz (12 dB/oct)
80 Hz (12 dB/oct)
120 Hz (6 dB/oct)
- Internal impedance
83.8 Ω
- PSU - supply voltage
230 V, 50 Hz
110 V, 60 Hz
- Current consumption
230V - 170 mA, 110V - 240 mA
- Connector PSU and remote
Gold-plated 3-pin XLR by Neutrik
- Connector
10-pin Hirose Electric
- Tube/Valve
E88CC / 6DJ8
- Microphone enclosure
Zinc die cast
- Microphone dimensions
196 x 65 x 45 mm, 7.7 x 2.6 x 1.8 in
- Microphone net weight
652 g, 23 oz
- PSU dimensions
240 x 170 x 47 mm, 9.4 x 6.7 x 1.9 in
- PSU net weight
2381 g, 68 oz
- Remote dimensions
240 x 163 x 52 mm, 9.4 x 6.4 x 2 in
- Remote weight
1952 g, 69 oz
Micrófonos medidos según: IEC 60268-4 | Alimentación phantom según: IEC 61938 | Medición de ruido según: IEC 60268-1
Sonido premium atemporal.
Incluido: Microphone mount, 7-pin XLR cable, Transport bag
Cápsula de condensador de 1"
Patrón Cardioide
Circuito de válvula puro
Válvula seleccionada manualmente 12AU7
Especificaciones
- Type
Condenser, externally polarized
- Acoustical operating principle
Pressure gradient transducer
- Diaphragm
3 micron gold sputtered Mylar
- Transducer Ø
25.4 mm, 1 in
- Polar pattern
Cardioid
- Frequency range
20 ... 20,000 Hz
- Sensitivity
28.2 mV/Pa, -31 dBV/Pa
- Self-noise
7 dB (A)
- Max SPL
132 dBSPL
- Signal / noise ratio
87 dB (A)
- Dynamic range
125 dB (A)
- PSU - supply voltage
230 V, 50 Hz
110 V, 60 Hz
- Connector
7-pin XLR connector
- Microphone enclosure
Zinc die cast
- Microphone dimensions
196 x 65 x 45mm, 7.7 x 2.6 x 1.8 in
- Microphone net weight
692 g, 24.41 oz
Micrófonos medidos según: IEC 60268-4 | Alimentación phantom según: IEC 61938 | Medición de ruido según: IEC 60268-1